Subject: Fuel flow required for starting and idle.
From: Rotary Engine
Date: 2/27/2007, 6:04 AM
To: AARotary Engine



Doc,
I just remembered I had this. No real need to run OBD II
test on the RX8 engine.
This will put us in the ball park.

-- 
Paul Lamar ...No rotor no motor.

Good! Adjust pump PWM to achieve fuel flow of  ~1.5 L/hr and adjust throttle
to stoichiometric air input. Tweak as required.

Doc Custer
Retired Software Engineer and sometime Audiologist

YES! You got it Doc. I am impressed.
That came from a Mazda SAE paper on the RX8.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.