Subject: Fuel flow required for starting and idle.
From: Rotary Engine
Date: 2/27/2007, 2:16 PM
To: AARotary Engine



You're losing some of us illterate computer types.
What is "pump PWM"???? Karibian




> Doc,
> I just remembered I had this. No real need to run
OBD II
> test on the RX8 engine.
> This will put us in the ball park.
>
> -- > Paul Lamar ...No rotor no motor.

Good! Adjust pump PWM to achieve fuel flow of  ~1.5
L/hr and adjust throttle
to stoichiometric air input. Tweak as required.

Doc Custer
Retired Software Engineer and sometime Audiologist

YES! You got it Doc. I am impressed.
That came from a Mazda SAE paper on the RX8.

Paul Lamar ...No rotor no motor.


You're losing some of us illterate computer types.
What is "pump PWM"???? Karibian



The RPM of DC electric motors is directly proportional to
the voltage applied to the motor.

PWM stands for Pulse Width Modulation.
It is a method of controlling the speed of DC electric motors
by switching the power on and off rapidly. If the power is on 50%
of the time the average voltage the DC motor sees is 50% of the
supply voltage so the motor runs at half maximum RPM.
It is done electronically  at hundreads of times per second so
the rotating inertia of the motor armature keeps it running at
a constant speed.

The one thing you have to have is a fuel pump. So we are
making it do two jobs. Pump fuel and control the amount of
fuel the engine needs at any engine RPM and prop load.
This mostly does away with all other parts of a typical EFI
fuel system. If they are not there they can't fail.

For way more than you really need to know:
http://en.wikipedia.org/wiki/Pulse-width_modulation

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.