Hi Doc,
Just got my $30 fuel injection computer from Peter Anderson.
Do you have a pdf file that gives a complete description
of the PICAXE BASIC programming language? In other words
the programming manual. I can't seem to find it on their
web site. I have a bunch of field-effect transistors to act
as fuel pump switches if you need one. As I recall they switch
30 amps at a couple of hundred volts. Will grab some
in the hanger today. I might have some Free Scale pressure
sensors as well. There is enough prototype area on this board
to hold the FET's and several pressure sensors.
--
Paul Lamar ...No rotor no motor.
Paul,
Try
http://www.world-educational-services.net/cart/ I got my order from
them except the proto board. They screwed up the order an are sending it.
You can download the basic manual and sw here. Hope this helps.
Joe Berki
Limo EZ
Thanks Joe. I had picaxe_manual1.pdf but picaxe_manual2.pdf
is what I needed. That is the 118 page complete reference
to the PICAXE BASIC programming language.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.