Paul
Here are some real servos.
these are used by the pro's for R/C.
priced from 189.00 - 350.00
depending on the gears and torque
values. great servos, they run on 12 volts too.
http://www.tokyo-hobbies.com/tonegawa.html
Tony
You might be able to use them direct with out the trim tabs.
Look like 80 inch pounds to me.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.