Hi Doc,
Just got my $30 fuel injection computer from Peter Anderson.
Do you have a pdf file that gives a complete description
of the PICAXE BASIC programming language? In other words
the programming manual. I can't seem to find it on their
web site. I have a bunch of field-effect transistors to act
as fuel pump switches if you need one. As I recall they switch
30 amps at a couple of hundred volts. Will grab some
in the hanger today. I might have some Free Scale pressure
sensors as well. There is enough prototype area on this board
to hold the FET's and several pressure sensors.
--
Paul Lamar ...No rotor no motor.
I got mine late last week. I ordered two. They are both different than
yours. Will send pix later.
Try http://www.rev-ed.co.uk/picaxe.
It is under datasheets. They changed the web site yesterday.
I think you want picaxe_manual2.pdf. I am attaching that one. There are
two
others, plus a lot of examples and tutorials.
The things I don't like about picaxe is that they require Windoze and
BASIC.
I am considering the bare PIC; their software runs under Linux. They have
both BASIC and Gnu C.
I am going to try the picaxe and see if I can tolerate their version of
BASIC. Then I will have to decide if I am willing to load Windoze on my
laptop. I really don't want to have to continue to use Windoze! :)
Doc Custer
Retired Software Engineer and sometime Audiologist
Thanks Doc. I just got down loaded it last night on the suggestion
of Joe Berki.
That PICAXE BASIC compiler IMHO is wonderful for controller use.
Is the PIC BASIC compiler the same or as good or are you going to
do it in ASM or C? I like ASM for real time as you have precise
control over the number of cycles any instruction takes to execute.
This stuff is pretty simple so ASM is not all that bad. I never
really bought in to C. The PICAXE boot loader is nice. I am not
sure PIC offers the same thing. Also some of the PICAXE BASIC
compiler code routines ar embedded along with the boot loader
code. The downloded code merely calls some of these routines.
I have resigned myself to the fact you can't always get
what your want so I keep an old Windoze computer around
and I have wheels on my office chair :) I also use a USB 4 gig
flash memory device for transferring files. Works like a charm
from Windoze to Linux but not so great in reverse.
Paul Lamar ...No rotor no motor.
OOPS! I got so carried away about BASIC and C that I forgot to mention
that
PIC has a complete set of FREE development tools.
Doc Custer
Retired Software Engineer and sometime Audiologist
The question is: is it as easy to get the code into the chip?
Also does it have one command for sending a string and
data back to the PC?
I'll check it out.
Doc Custer
Retired Software Engineer and sometime Audiologist
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.