We built a p-port engine based on that design and basically verified
the torque and HP numbers published by Mazda on the dyno at Mazdatrix.
Here is some of the Mazda data. On the torque curves you
need to add 14 mm as these number are from the fixed length
part of the runners.
I think that is 140mm not 14mm.
Blake C. Lewis
Thanks for catching that Blake. What it was supposed to be
was 14 inches or 356 mm.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.
