> We built a p-port engine based on that design and basically verified
> the torque and HP numbers published by Mazda on the dyno at Mazdatrix.
> Here is some of the Mazda data. On the torque curves you
> need to add 14 mm as these number are from the fixed length
> part of the runners.

I think that is 140mm not 14mm.


--
Blake C. Lewis

After making some measurements on Lemans-rotor-dimensions-overlay.jpg
I think it is 14" not 14mm nor 140mm.
14" + 175mm = 20.9" and measuring the drawing from max extension to
rotor housing is approximately 21".