Subject: Schertz beam metric oil pan Allen bolts.
From: Rotary Engine
Date: 3/2/2007, 12:33 PM
To: AARotary Engine



If any of you people are having trouble getting
your Metric 6 mm oil pan Allen bolts in I suggest
making this tool.

Bend a long metric Allen wrench and or make it out
of 1/4 inch steel rod with the bit welded on.
--  Paul Lamar ...No rotor no motor.

 The Allen wrench will have to be the retaining ring type available
from Wiha.  Jerry


You got a picture of that Jerry?
---------------------------------------------------
Never mind I found it.  I think heavy grease will work
too.

Paul Lamar ...No rotor no motor

Heavy grease might work or not.  The retaining ring really grips the
bolt well.  I just  ordered a pack of 10 to convert into wrenches.
Jerry


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.