Subject: N93BD is seriously damaged.
From: Rotary Engine
Date: 3/4/2007, 8:38 AM
To: AARotary Engine





   Just to let everyone know I had a serious problem with a landing
   today and the plane is seriously damaged.  Pilot has a scratch on his
   thumb.

   I had a pretty bad bounce on landing and after the second bounce,
   decided to go around. That was a mistake.  I never got out from behind
   the power curve and ended up doing a high power skid into the grass on
   the south side of the runway.  Both main wheels were torn off, the prop
   disintegrated, an the fuselage is somewhat bent.  After contacting the
   ground, the plane did about 1/2 turn and skidded to a stop.

   Bob W.

   --
   N93BD - Rotary Powered BD-4 - http://www.bob-white.com
   First Flight:  11/23/2006 7:50AM - 3.3 Hours Total Time
   Cables for your rotary installation - http://www.roblinphoto.com/shop/

   Dang! I was just about to go over there and take some pictures
   of Bob's airplane. I have never been a fan of tail dragger's.
   I think they add to the hazards of aviation. They are fundamentally
   unstable on the ground. The CG is behind the main wheels. Therefore
   there are situation where they are impossible to control no matter
   how good the pilot.

   ----------------------------------------------------------
   Bob, we are taking an early stand by flight non-stop to Albuquerque
   Monday morning. I'll call you when we arrive. I would like
   to see how the motor mount made out.

   Folks, the news letter will be shut down about noon today for
   a few days. Don't send messages until I get back.

   Paul Lamar ...No rotor no motor.

Glad to hear Bob's okay..


Matt-



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.