Just to let everyone know I had a serious problem with a landing
today and the plane is seriously damaged. Pilot has a scratch
on his
thumb.
I had a pretty bad bounce on landing and after the second bounce,
decided to go around. That was a mistake. I never got out from
behind
the power curve and ended up doing a high power skid into the
grass on
the south side of the runway. Both main wheels were torn off,
the prop
disintegrated, an the fuselage is somewhat bent. After
contacting the
ground, the plane did about 1/2 turn and skidded to a stop.
Bob W.
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
First Flight: 11/23/2006 7:50AM - 3.3 Hours Total Time
Cables for your rotary installation -
http://www.roblinphoto.com/shop/
Dang! I was just about to go over there and take some pictures
of Bob's airplane. I have never been a fan of tail dragger's.
I think they add to the hazards of aviation. They are
fundamentally
unstable on the ground. The CG is behind the main wheels.
Therefore
there are situation where they are impossible to control no
matter
how good the pilot.
----------------------------------------------------------
Bob, we are taking an early stand by flight non-stop to
Albuquerque
Monday morning. I'll call you when we arrive. I would like
to see how the motor mount made out.
Folks, the news letter will be shut down about noon today for
a few days. Don't send messages until I get back.
Paul Lamar ...No rotor no motor.
Glad to hear Bob's okay..
Matt-
With over 6500 hrs in tail-dragger's and no accidents or incidents, I
think you need to reassess your "opinion" of tail-dragger's. It's good
when a man knows his limitations...
Eric Benson
It is not an opinion. It is a law a physics. The CG is behind the
side force input and that causes severe yawing motion in the
airplane.
It is the same as putting the feathers on the front of the arrow.
Your obviously a highly skilled pilot that can handle a fundamentally
unstable design. Particularly on pavement. However most of the
people on here are building airplanes and not bush flying for a
living.
They are rusty to say the least and some are brand new pilots
with little time in tail dragger's if any. They need all the help
they can get. A nose gear airplane is stable when touching down,
unlike a tail dragger, because the side restoring force is behind
the CG just like the feathers on the back end of an arrow.
Statistically speaking tail dragger's have more accidents
and hence hull insurance cost more.
http://www.eaa.org/communications/eaanews/051215_insurance.html
Paul Lamar ...No rotor no motor.
That's why you have what's called a "rudder". Your feet do not belong
on the floor, they belong on the rudder pedals flying the airplane.
Your comparison of an arrow's feathers on the front of an arrow is
invalid.
If you'd like to come out to my airport, it is KAOC which has a 6600 ft
asphalt runway. We are at the heart of the Idaho back-country and have
not had any "accidents" with all these "unstable" aircraft flying
around on my airport.
Regards,
Eric Benson
I have no doubt you are a wonderful pilot Eric.
That does not change the laws a physics however.
The feathers on the front of the arrow are exactly
the problem.
Paul Lamar ...No rotor no motor.
Well, to each his own. You will never convince me an aircraft design
that has been flying for about 100 years is unsafe. If you are "rusty"
I would suggest hiring an instructor to refresh yourself. It really
comes down to this: If you are unsure about your skills, hire an
instructor for a couple hours for about $100.00 or spend thousands of
dollars repairing your airplane and possibly hurting an innocent
bystander.
Your simplistic view of "physics" can be used to justify the "unsafe"
condition of just about anything that moves, including walking.
Regards,
Eric.
I am not trying to convince you. Your mind is made up.
Not true. Physics is the law. It is not an opinion.
Opinions are just that... opinions unsubstantiated by the
facts. Place a fragile glass ball such as a Christmas tree ornament
inside a bowl and it is stable and safe. Turn the bowl up side
down and place the ball on the bottom of the bowl and it is
unstable and not safe.
http://auto.howstuffworks.com/28001-stability-control.htm
In the attached top dwg the nose gear aircraft is stable.
The turning moment from the side force the main landing gear
tires generate corrects the heading of the aircraft.
The lower dwg the tail dragger aircraft is unstable.
The heading continues to diverge as the turning moment
from the side force generated by the main landing gear
tires amplifies the heading divergence of the aircraft.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.