> Does any one know where to buy fuel inj connectors for the rx7
1991 non
> turbo? The dealers want to sell the entire harness. Maybe I'll
replace
> the injectors and if there are alternate makes w/ connectors
available
> that will do the job then I could go that way.
>
> John Prendergast
Hi John;
One source for center-tab style MSD connectors is:
http://store.summitracing.com/partdetail.asp?autofilter=1?=MSD%2D2400&N=700+115&autoview=sku
They fit the s4 NA 460cc injectors, I do not know if the s5 NA
injectors
are the same.
Cheers
Cary
Well I bought the connectors from Summit and also Robin photo. Both
where the same and did not fit. They may fit another version. My 1991 NA
RX7 has a connector which is common to the 86-91 NA engines and it is
oval in shape.
I did manage to figure out how to remove the crimp connector from the
molded connector so now I must try to determine the Amp part number to
order from Digi-Key.
John Prendergast
Hi John;
I did some more digging on the rx7 fuel injectors.
Here is a stolen list of fuel injectors info:
(Note that some injectors carry the same part number as others but plug
styles and resistances can vary. Low impedance refers to 2-3? ohms, high
impedance refers to 12-13? ohms.)
Year type impedance plugStyle plugNotchPosition flowRating
color partNumber
•• 84-85 13B NT low square center 680cc
orange 195500-0900
•• 86-87 13B NT low square center 460cc
red 195500-1350
•• 86-87 13BT low square center 550cc
tan 195500-1370
•• 88 13B NT high square offset 460cc
purple 195500-1350
•• 88 13BT high square offset 550cc
purple 195500-1370
•• 89-91 13B NT high oval center 460cc
red 195500-2010
•• 89-91 13BT high oval center 550cc
purple 195500-2020
MSD-2400 will fit the square center connectors -
http://store.summitracing.com/partdetail.asp?part=MSD%2D2400
AC Delco PT425 (GM dealer 12116252) - discontinued - will supposedly fit
oval center connectors.
NAPA Echlin 2-18457
http://www.rx7.com/store/rx7/fcfuel.html
http://www.fiveomotorsport.com/Injector_CONNECT.asp - see the
*NipponDenso*
Also possibly:
BMW 6113-1358-330,
GP Sorenson part 800-9416
Standard Ignition Corp. SK-25
It is also worth noting that the oval center connectors appear to be a
japanese only design - Toyota (and others) appear to have also
used them in the following engines 22RE, S3-FE, 4A-FE.
As an aside, here is an interesting thread on cleaning your fuel injectors:
http://starquest.i-x.net/viewtopic.php?t=902
Cheers
Cary
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.