Subject: Turbocompound for rotary automobile
From: Rotary Engine
Date: 3/12/2007, 10:35 AM
To: AARotary Engine



    >Paul,
    >
    >I was wondering about applications of your turbo compound idea in
   a Mazda rotary automobile.
    >
    >At http://www.rotaryeng.net/why-tc.txt second to last paragraph
   you have:
    >
    >"We are now building a traction drive device to extract the excess
   HP from a stock turbo charger. Input speed RPM can be up to 120,000
   RPM and output RPM will be one tenth of that. The power from the
    >traction drive output shaft will be transfered to the e-shaft of
   the rotary by a multi v belt to absorb the torsional vibrations from
   the rotary engine."
    >
    >Are the torsional vibrations this traction drive is designed to
   deal with a factor of the rotating propeller on an airplane?  I
   guess what I'm wondering - is the traction drive necessary in an
   automobile?
    >
    >Apologies for being off the subject of aviation.
    >
    >Nate Fairchild
    >
    >Due to the small size and high RPM (100 K) of the turbine and the
    >pitch line velocity limitations of gears a traction drive is about
    >the only way I know of doing it.
    >
    >Paul Lamar ...No rotor no motor.

   Hmm.  In that case, you may be interested in this:

   http://www.w2wpowertrain.com/t-techRotrex-2.aspx

   It is a traction drive mated to a centrifugal compressor for
   supercharging, but it doesn't look like it would be too difficult to
   mate it to a turbine instead.

   This brings up my next question - what is the ideal sized turbine,
   A/R etc?

   Nate Fairchild


   ----------------------------------------------------
   Yes I am familiar with it. It is where I got the inspiration for the
   traction drive. I think Doug Fir discovered it. Doug on here in
   Japan has
   one. He too is working on a turbo compound rotary. Unfortunately the
   unit
   rotates in the wrong direction for use with the stock turbo in the stock
   position. I basically copied the idea but the basic principle was
   developed
   decades ago. The so called patents they "have" IMHO are a smoke
   screen to
   make people think it is unique. Notice in the illustrations on this
   website presentation the patented principle is not used. Perhaps the
   patent
   was rejected by the patent office or challenged.

   BTW Doug, check out this web site. There are a lot of new Rotrex
   illustrations
   that I have not seen before. Here are a few. The most interesting is
   the oil system jpg.

   I can't answer your last questions but a large aerospace company here
   in LA is working on it for UAV applications  I think.  NASA has
   sponsored
   several technical studies on the turbo compound rotary. NASA have
   changed
   their data base server web site so look for the NASA/NACA tech paper
   server.

   I have a lot more info so if you are interested keep asking questions.

   Paul Lamar ...No rotor no motor.


Paul,
Regarding the difficulties with the traction drive, did you ever look at
the possibility of driving an electrical generator or hydraulic pump off
of the turbo unit and then coupling it to an appropriate
electric/hydraulic motor?
MICHAEL D PARKER

----------------------------------------------------------------
Yes we did.  The problem with that sort of approach is series efficiency's
result in much lower over all efficiency. Mechanical devices like traction
drives and gear boxes have efficiencies in the high 90's.
Electrical motors, generators and hydraulic pumps have efficiencies in the
mid 80's. A torque converter in an an automatic transmission has an
efficiency of about 60% when it is actually converting RPM to torque
(so to speak).  Lets say we have a generator in series with a motor.
The over all eff. is .85 times .85 or .72%. It is hardly worth doing
a turbo compound configuration with that low of an overall power
conversion efficiency.

BTW Speaking of that I notice that new Toyota Prius's are now being
discounted in Southern California :) Prius's and Honda hybrid cars
have technology in them that has nothing to do with the hybrid drive.
They both are extremely low in aerodynamic drag and have low rolling
resistance with hard compound, high pressure tires. They also use extensive
amounts of aluminum in body and chassis parts. My contention is if
the weight of the heavy batteries and large generator/motor is removed and
replaced by a slightly larger engine the on highway fuel consumption
would be nearly the same with a drastic reduction in first cost,
overall weight and a savings in precious natural resources such as
copper and other materials.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.