Subject: Turbocompound for rotary automobile
From: Rotary Engine
Date: 3/12/2007, 1:02 PM
To: AARotary Engine


    >> Paul,
    >>
    >> I was wondering about applications of your turbo compound idea
   in a Mazda
    >> rotary automobile.
    >>
    >> At http://www.rotaryeng.net/why-tc.txt second to last paragraph
   you have:
    >>
    >> "We are now building a traction drive device to extract the
   excess HP from a
    >> stock turbo charger. Input speed RPM can be up to 120,000 RPM
   and output RPM
    >> will be one tenth of that. The power from the
    >> traction drive output shaft will be transfered to the e-shaft of
   the rotary
    >> by a multi v belt to absorb the torsional vibrations from the
   rotary engine."
    >>
    >> Are the torsional vibrations this traction drive is designed to
   deal with a
    >> factor of the rotating propeller on an airplane? I guess what
   I'm wondering
    >> - is the traction drive necessary in an automobile?
    >>
    >> Apologies for being off the subject of aviation.
    >>
    >> Nate Fairchild
    >>
    >> Due to the small size and high RPM (100 K) of the turbine and the
    >> pitch line velocity limitations of gears a traction drive is about
    >> the only way I know of doing it.
    >>
    >> Paul Lamar ...No rotor no motor.
    >
    > Hmm. In that case, you may be interested in this:
    >
    > http://www.w2wpowertrain.com/t-techRotrex-2.aspx
    >
    > It is a traction drive mated to a centrifugal compressor for
   supercharging,
    > but it doesn't look like it would be too difficult to mate it to
   a turbine
    > instead.
    >
    > This brings up my next question - what is the ideal sized
   turbine, A/R etc?
    >
    > Nate Fairchild
    >
    >
    > ----------------------------------------------------
    > Yes I am familiar with it. It is where I got the inspiration for the
    > traction drive. I think Doug Fir discovered it. Doug on here in
   Japan has
    > one. He too is working on a turbo compound rotary. Unfortunately
   the unit
    > rotates in the wrong direction for use with the stock turbo in
   the stock
    > position. I basically copied the idea but the basic principle was
   developed
    > decades ago. The so called patents they "have" IMHO are a smoke
   screen to
    > make people think it is unique. Notice in the illustrations on this
    > website presentation the patented principle is not used. Perhaps
   the patent
    > was rejected by the patent office or challenged.
    >
    > BTW Doug, check out this web site. There are a lot of new Rotrex
   illustrations
    > that I have not seen before. Here are a few. The most interesting is
    > the oil system jpg.
    >
    > I can't answer your last questions but a large aerospace company here
    > in LA is working on it for UAV applications I think. NASA has
   sponsored
    > several technical studies on the turbo compound rotary. NASA have
   changed
    > their data base server web site so look for the NASA/NACA tech
   paper server.
    >
    > I have a lot more info so if you are interested keep asking
   questions.
    >
    > Paul Lamar ...No rotor no motor.
    >

   Paul,

   Nice illustrations. Glad I didn't have to pull the bearing off of the
   rollers. Simple huh? Notice the oil travels down the center of the tiny
   shaft and comes out a few holes there. That 6mm dia. shaft BTW can
   transmit
   over 40 HP at 6,000 rpm according to the engineer I spoke with. I may
   eventually have to use the larger 38 series unit with a larger shaft
   that
   can transmit 70 Hp at 6,000 rpm. The difference is in their reduction
   ratios and input shaft size.


   To run it in reverse I have to do a few modifications.

   The oil pump vane pump I have (you have a picture from me) doen't
   need to
   modified but the oil pickup and injection channels will need to be
   plugged
   and redrilled. In Addition the input and output shaft threads handedness
   need be reversed. All in all not as bad as I first thought.

   I still will have to mount the turbine compressor shaft side facing
   towards
   the flywheel end. This will necessitate flipping it back to front and
   rotating the center section back down 180 degree so that the oil
   drain back
   hole remains below.


   Regards

   Doug

   BTW I don't recall mentioning this before but one of the challenges in
   the turbo compound rotary is the exhaust temperature reducing the
   life and speed of the blow down turbine. There is a solution.
   A thermal couple is two wires of different material connected together.
   In the presence of heat it will generate a small voltage and a small
   amount of current. If a large number are connected together in a
   parallel
   and series configuration they can generate significant voltage and
   current AKA electrical power. The combination is called a thermal pile
   or some such. If this thermal pile is mounted between exhaust port and
   turbine on the inner surface of the the exhaust manifold it will cool
   the exhaust gas as well as generate power for electrical needs in a UAV,
   aircraft engine or car. This of course further adds to the excellent
   overall efficiency of the turbo compound rotary engine.


   Paul Lamar


Paul,

I'm not sure how this thermal pile is going to cool the exhaust gases.
True a millivoltage is generated when two specific metals are welded
together and in the immediate presence of higher temperatures.  I just
don't make the jump to the cooling part.

Allen Slominski
Houston, TX

Think of 1000's of them protruding into the exhaust manifold.
Power is heat. Heat in... power out.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.