Subject: Turbocompound for rotary automobile
From: Rotary Engine
Date: 3/12/2007, 10:28 PM
To: AARotary Engine



Paul,

I was wondering about applications of your turbo compound idea
in a Mazda
rotary automobile.

At http://www.rotaryeng.net/why-tc.txt second to last paragraph
you have:

"We are now building a traction drive device to extract the
excess HP from a
stock turbo charger. Input speed RPM can be up to 120,000 RPM
and output RPM
will be one tenth of that. The power from the
traction drive output shaft will be transfered to the e-shaft of
the rotary
by a multi v belt to absorb the torsional vibrations from the
rotary engine."

Are the torsional vibrations this traction drive is designed to
deal with a
factor of the rotating propeller on an airplane? I guess what
I'm wondering
- is the traction drive necessary in an automobile?

Apologies for being off the subject of aviation.

Nate Fairchild

Due to the small size and high RPM (100 K) of the turbine and the
pitch line velocity limitations of gears a traction drive is about
the only way I know of doing it.

Paul Lamar ...No rotor no motor.

Hmm. In that case, you may be interested in this:

http://www.w2wpowertrain.com/t-techRotrex-2.aspx

It is a traction drive mated to a centrifugal compressor for
supercharging,
but it doesn't look like it would be too difficult to mate it to
a turbine
instead.

This brings up my next question - what is the ideal sized
turbine, A/R etc?

Nate Fairchild


----------------------------------------------------
Yes I am familiar with it. It is where I got the inspiration for the
traction drive. I think Doug Fir discovered it. Doug on here in
Japan has
one. He too is working on a turbo compound rotary. Unfortunately
the unit
rotates in the wrong direction for use with the stock turbo in
the stock
position. I basically copied the idea but the basic principle was
developed
decades ago. The so called patents they "have" IMHO are a smoke
screen to
make people think it is unique. Notice in the illustrations on this
website presentation the patented principle is not used. Perhaps
the patent
was rejected by the patent office or challenged.

BTW Doug, check out this web site. There are a lot of new Rotrex
illustrations
that I have not seen before. Here are a few. The most interesting is
the oil system jpg.

I can't answer your last questions but a large aerospace company here
in LA is working on it for UAV applications I think. NASA has
sponsored
several technical studies on the turbo compound rotary. NASA have
changed
their data base server web site so look for the NASA/NACA tech
paper server.

I have a lot more info so if you are interested keep asking
questions.

Paul Lamar ...No rotor no motor.


Paul,

Nice illustrations. Glad I didn't have to pull the bearing off of the
rollers. Simple huh? Notice the oil travels down the center of the tiny
shaft and comes out a few holes there. That 6mm dia. shaft BTW can
transmit
over 40 HP at 6,000 rpm according to the engineer I spoke with. I may
eventually have to use the larger 38 series unit with a larger shaft
that
can transmit 70 Hp at 6,000 rpm. The difference is in their reduction
ratios and input shaft size.


To run it in reverse I have to do a few modifications.

The oil pump vane pump I have (you have a picture from me) doen't
need to
modified but the oil pickup and injection channels will need to be
plugged
and redrilled. In Addition the input and output shaft threads handedness
need be reversed. All in all not as bad as I first thought.

I still will have to mount the turbine compressor shaft side facing
towards
the flywheel end. This will necessitate flipping it back to front and
rotating the center section back down 180 degree so that the oil
drain back
hole remains below.


Regards

Doug

BTW I don't recall mentioning this before but one of the challenges in
the turbo compound rotary is the exhaust temperature reducing the
life and speed of the blow down turbine. There is a solution.
A thermal couple is two wires of different material connected together.
In the presence of heat it will generate a small voltage and a small
amount of current. If a large number are connected together in a
parallel
and series configuration they can generate significant voltage and
current AKA electrical power. The combination is called a thermal pile
or some such. If this thermal pile is mounted between exhaust port and
turbine on the inner surface of the the exhaust manifold it will cool
the exhaust gas as well as generate power for electrical needs in a UAV,
aircraft engine or car. This of course further adds to the excellent
overall efficiency of the turbo compound rotary engine.


Paul Lamar


Paul,

I'm not sure how this thermal pile is going to cool the exhaust gases.
True a millivoltage is generated when two specific metals are welded
together and in the immediate presence of higher temperatures.  I just
don't make the jump to the cooling part.

Allen Slominski
Houston, TX

Think of 1000's of them protruding into the exhaust manifold.
Power is heat. Heat in... power out.

Paul Lamar ...No rotor no motor.


Paul

Come on are you pulling our collective legs here:)  Thermo electric
semiconductors are much more efficient but still very pricey.


This was lifted from a defunct companies' website.


A Brief History

Early 19th century scientists, Thomas Seebeck and Jean Peltier, first
discovered the phenomena that are the basis for today's thermoelectric
industry. Seebeck found that if you placed a temperature gradient across the
junctions of two dissimilar conductors, electrical current would flow.
Peltier, on the other hand, learned that passing current through two
dissimilar electrical conductors, caused heat to be either emitted or
absorbed at the junction of the materials. It was only after mid-20th
Century advancements in semiconductor technology, however, that practical
applications for thermoelectric devices became feasible. With modern
techniques, we can now produce thermoelectric modules that deliver efficient
solid state heat-pumping for both cooling and heating; many of these units
can also be used to generate DC power in special circumstances (e.g.,
conversion of waste heat). New and often elegant uses for thermoelectrics
continue to be developed each day.

A Closer Look

A typical thermoelectric module consists of an array of Bismuth Telluride
semiconductor pellets that have been doped so that one type of charge
carrier either positive or negative carries the majority of current. The
pairs of P/N pellets are configured so that they are connected electrically
in series, but thermally in parallel. Metalized ceramic substrates provide
the platform for the pellets and the small conductive tabs that connect
them. The pellets, tabs and substrates thus form a layered configuration.
Module size varies from less than 0.25" by 0.25" to approximately 2.0" by
2.0". Thermoelectric modules can function singularly or in groups with
either series, parallel, or series/parallel electrical connections. Some
applications use stacked multi-stage modules."


Hi-Z in San Diego still makes and sells them. Prepare for sticker shock.
Efficiency is still in the low single digits and the mounting clamping and
heat conductors become much  heavier then the device itself.

Buy them here http://www.hi-z.com/index.html

BTW Gordon deserves the credit for finding and introducing the Rotrex drive
to the group.

Regards


Doug

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.