Here a  few photos of the first rear beam engine mount, finished and
ready to ship.  Since it was the first,  we had a lot to learn.  It
did not go perfectly but I am pleased to say that we encountered no
fatal errors and we were able to respond with repairs and adjustments
to get to  the final product.   I absolutely love this engine mount.
It is very strong,  light,and  out of the way.  Look at the room
around the engine for exhaust and intake and cooling.  This engine
mount is designed around the concept of the belly rad with the intake
plenum above it.

Of the three photos, I like the last one particularly.    Just bolt
on  your engine -- no problems of any kind.   Congratulations to Paul
for such a beautiful design.   Jerry

P.S:  bolting the S-beam in place is a bitch currently.  I am making
a special tool to make it easier.   Once the current crop of S-beams
is expended a new "EASY INSTALL"  version will take their place.  If
you want roll your own S-Beam engine mount  I have 10 beams that I
will sell way below cost, $25.00 ea.  They are drilled for the Barry
mount and have the aluminum spacer. Drilling to fit your pan flange
is your problem is all you got to do.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.