Hello guys it makes a long time since my last
communications with you.
But still I follow the conversations.
I am writing today to have your opinion on the
Warpdrive propeller.
I am changing the configuration of my wind tunnels
Instead of using one DC-3 propeller with a 1000 hp
Now I want to use 5, 200 hp motors with 68 inchs
props.
According to my calculations at 2300 rpm and 70 inchs
pitch 3 blades.
I should have 150 mph of wind and 195 hp consumption.
475 pounds in static thrust.
Unless these prop have not the same efficiency than
Hamilton Standard , these calculations should be
accurate enough.
Does any of you knows Warpdrive ?
Thank you very much for your help.
Frank
I know this is off-topic, but I've done this at Skyventure in Orlando,
which is right beside Universal Studios. If you are ever in the area,
it is GREAT fun, safe and relatively inexpensive! Watch the video at:
http://www.skyventureorlando.com/
Scott Gettings
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.