Paul--

I believe I am ready for the various dimensions, at your
convenience--have the mixed blessing of being retired (recycled) and a
MacGyver for a partner in this venture.

 If you will, please include specs on oil pan material (thicknesses and
type of aluminum alloy) as well as specs for construction of shertz beam
(thickness of 4130 sheet to use and dimensions, etc. s-tube? or .5"
square tube?)--will help me determine whether or not to make them myself
or farm the job out.

Tom

Oil pan 6061 T6 material thickness is a function of how good of a tig welder you are.
Anything from .050 throuh 1/4 inch will work. The pack panel should
be .090 or thicker. Same for the flange.

A one off 4130 Schertz beam is very expensive indeed. Not something one can make
in a pan brake. Here are the dwgs.


More dims to come.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.