Thanks to everyone that helped me with my questions on the e-shaft removal,
& Paul also for the site for shop manuals, very helpful.   Now I'm into
relocating the oil filter.  Sometime back I believe there was some
conversation around this.  I'm looking for a source to buy a kit to do this.
I thought Racing Beat sold them, but it is only a adapter that goes under
the filter.  Can someone steer me in the right direction?  Also, looking for
a oil flow schematic for the Renesis engine.  The one in the on line shop
manual is not very clear.

I built a new aluminum oil pan that's now in the welding shop, hope to have
it back by this weekend.

Thanks,
Bob Forbes
Upstate NY
N164WF

Here is all I have. Ask questions if needed.

-
Paul Lamar ...No rotor no motor.

Hi Bob  If you have the room to install it, you might consider one of
ours---See www.pletting.com    I flew a 182 in Alaska that had a Aero Frantz
(same type of filter, STC #SA695CE dated 11 March 1970) that allowed us to
double our oil change frequency.  I was so impressed by what the filter did,
I've been marketing them ever since.  This could allow you to mount a filter
anywhere there is room and running a pressure and return line to and from
it---John Pletting

------------------------------------------------------


In response to the inquiry for a source--JC Whitney sells a remote oil
filter setup (trust the link will work):

www.jcwhitney.com/autoparts/Browse/tf-Browse/s-10101/N-111+10201+600002024/c-10101
<http://www.jcwhitney.com/autoparts/Browse/tf-Browse/s-10101/N-111+10201+600002024/c-10101>


Tom



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.