Subject: Exhaust P Port & engine mount
From: Rotary Engine
Date: 3/16/2007, 4:34 PM
To: AARotary Engine



Paul,
What effect does the exhaust header have on overall performance in a P
Port?  Comparing a tuned set of SS headers with the cast Iron manifold.
I thought that the intake runner length was some what critical ( looks
like 28" would be ideal for the 2.85 to 1 PSRU).  Next question.  I have
implemented your method of mounting the rear of the engine with the
vibrational isolators in the X axis.  What would happen if I lengthen
one of the "arms" created by this type of mount?  I would do this to
modify the mount to clear the stock exhaust manifold.  The reasons for
entertaining this idea is that the stock manifold will handle the heat
and noise better.  Also the plumbing coming out of it is a lot simpler.
Just want to find out if it is worth it. Thanks for any help

Joe Berki
Limo EZ

Yes 28" is close to 32" that Everett found.

I don't follow you on the front mount. Two arms? Why two arms?
Sketch?
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.