Subject: Why you need 3D CAD
From: Rotary Engine
Date: 3/16/2007, 12:13 PM
To: AARotary Engine

It is not only rotary engines that have installation problems.
Here is an unforeseen problem with the Questair kit.
The owner bought a 3 into one tuned exhaust system for the IO 550 without
checking if it would fit. It don't :) The other problem is a lot
of heat is going to find its way into that Barry rubber bushing.
Having a 3D program can save a year or two.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.