Subject: Metric pipe fitings
From: Rotary Engine
Date: 3/22/2007, 2:46 PM
To: AARotary Engine



    >
    > I'm having problems finding conversion fittings on-line to convert my
    > Renesis engine metric pipe threads to NPT. Does anyone know where
    > I can
    > find a source for this? Also, can someone tell me what metric
    > size and
    > thread I have for my Renesis main oil feed outlet on the right
    > lower side
    > (as mounted in the aircraft) that was used to feed the oil cooler?
    >
    > Paul, congratulations on your book, can't wait to read it.
    >
    > Thx,
    > Bob Forbes
    > N164WF
    >
    > I think McMaster Carr has a few. http://www.mcmaster.com/
    > Earl's Supply may have a few. http://www.earlsindy.com/
    >
    > And Baker has a few. http://www.bakerprecision.com/
    >
    > Metric threads come in several different pitches.
    > In the U.S. it is fine and course. There are at least three
    > different thread pitches in Metric sizes making it more
    > difficult.
    >
    > If its female go to a the hardware store and buy several
    > different metric thread pitch bolts about the right diameter
    > and see which one screws in there easily.
    >
    > Also McMaster Carr has Metric thread pitch gages.
    > --
    > Paul Lamar ...No rotor no motor.
    >


   The Renesis oil line fittings are 18 x 1.5. You won't find any metric
   bolts that size in a hardware store, but they may have a metric thread
   pitch gage 8-)

   Scott Gettings

   Wow! 18 mm? that big.
   --
   Paul Lamar ...No rotor no motor.


Try Batinc.com. It's a company out of Florida and sells metric/NPT
adapters and other useful things.

Brian Trubee



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.