>
> I'm having problems finding conversion fittings on-line to
convert my
> Renesis engine metric pipe threads to NPT. Does anyone know where
> I can
> find a source for this? Also, can someone tell me what metric
> size and
> thread I have for my Renesis main oil feed outlet on the right
> lower side
> (as mounted in the aircraft) that was used to feed the oil cooler?
>
> Paul, congratulations on your book, can't wait to read it.
>
> Thx,
> Bob Forbes
> N164WF
>
> I think McMaster Carr has a few. http://www.mcmaster.com/
> Earl's Supply may have a few. http://www.earlsindy.com/
>
> And Baker has a few. http://www.bakerprecision.com/
>
> Metric threads come in several different pitches.
> In the U.S. it is fine and course. There are at least three
> different thread pitches in Metric sizes making it more
> difficult.
>
> If its female go to a the hardware store and buy several
> different metric thread pitch bolts about the right diameter
> and see which one screws in there easily.
>
> Also McMaster Carr has Metric thread pitch gages.
> --
> Paul Lamar ...No rotor no motor.
>
The Renesis oil line fittings are 18 x 1.5. You won't find any metric
bolts that size in a hardware store, but they may have a metric
thread
pitch gage 8-)
Scott Gettings
Wow! 18 mm? that big.
--
Paul Lamar ...No rotor no motor.
Try Batinc.com. It's a company out of Florida and sells metric/NPT
adapters and other useful things.
Brian Trubee
At this site there are listings of the key dimensions and TPI of the US
NPT, the British and the DIN pipe threads.
The Germans did not develop their own pipe threads but used the British
more or less.
Differences are mainly in the TPI (threads per inch).
http://www.engineeringtoolbox.com/thread-standards-d_749.html
Rolf Pfeiffer
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.