>
> I'm having problems finding conversion fittings on-line to convert my
> Renesis engine metric pipe threads to NPT. Does anyone know where
> I can
> find a source for this? Also, can someone tell me what metric
> size and
> thread I have for my Renesis main oil feed outlet on the right
> lower side
> (as mounted in the aircraft) that was used to feed the oil cooler?
>
> Paul, congratulations on your book, can't wait to read it.
>
> Thx,
> Bob Forbes
> N164WF
>
> I think McMaster Carr has a few.
http://www.mcmaster.com/
> Earl's Supply may have a few.
http://www.earlsindy.com/
>
> And Baker has a few.
http://www.bakerprecision.com/
>
> Metric threads come in several different pitches.
> In the U.S. it is fine and course. There are at least three
> different thread pitches in Metric sizes making it more
> difficult.
>
> If its female go to a the hardware store and buy several
> different metric thread pitch bolts about the right diameter
> and see which one screws in there easily.
>
> Also McMaster Carr has Metric thread pitch gages.
> --
> Paul Lamar ...No rotor no motor.
>
The Renesis oil line fittings are 18 x 1.5. You won't find any metric
bolts that size in a hardware store, but they may have a metric thread
pitch gage 8-)
Scott Gettings
Wow! 18 mm? that big.
--
Paul Lamar ...No rotor no motor.
Try Batinc.com. It's a company out of Florida and sells metric/NPT
adapters and other useful things.
-------------------------------------
Oops, sorry about that, the address is www.
*batinc*.net/main.htm.
<http://www.batinc.net/main.htm.>
Brian Trubee
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.