I need to know if the bolts that attach the engine mount to the
   lower
        corners of the firewall can inserted from the back with nuts on the
        engine side? thanks, Jerry

   Jerry
   I don't know, off hand. I have my bolts installed with the heads on the
   engine side. I suppose you could reverse them, I don't recall if they
   are nyloc nuts, which is a no-no in the engine compartment. How far
   along are you?

   Brian Trubee

If the concern with the nyloc is heat then I would assume it would
be dangerous to use them on the cockpit side. Wouldn't the bolt
transmit heat to the plastic?
-Jeff (Jeff Martin)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.