Has anybody tried, or can you try, tig welding SS to a chrome bumper?
--
Paul Lamar ...No rotor no motor.
Should be no problem,
The chrome,nickel, and copper will burn off, or will
amalgamate, leaving the steel.
A few considerations:
Some earlier bumpers were tempered, so the localized area will lose temper.
Although the SS will flow nicely, and look pretty, It will not give nax
strength if that is what is required.
Archie
I was thinking of welding a SS tube into a hole
in the chrome plated mild steel rotor housing liner.
Thanks for you comments. I think I will get a junk
rotor housing and try this. We can chamfer the hole
in the rotor housing liner so perhaps that will expose
a enough mild steel to work.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.