Subject: Rolls Royce book on turbines
From: Rotary Engine
Date: 3/25/2007, 3:59 PM
To: AARotary Engine



    I picked this up in down town London at a technical book
    store. I'll have more from it on Sunday with title and ISBN number.
    Here are the first three pages and other stuff.

    -----------------------------------
    Next three pages. Make a folder and put this stuff in it as there
    is more to come.

    Paul Lamar ...No rotor no motor.


    Paul,

    Excellent stuff -- keep it coming.


    Regards,

    Gordon

    I started to look around in this book and see how many more pages I had
    to scan and got discouraged. The book is strangely organized with
    all formulas in one section on ten pages and all graphs in
    another section. I found it very hard to read and keep my train
    of thought. Sorry guys you are going to have to mail order it.
    Too much to scan.

    Title is Gas Turbine Performance. P.P. Walsh and P. Fletcher.
    Publisher Blackwell Science 1998.

    US office is 800 759 6102.
    Canada 204 837 2987
    Australia 03 9347 0300
    UK 01235 465500

    ISBN 0-632-04874-3

    www.blackwell-science.com
    http://www.blackwellpublishing.com/contents.asp?ref=9780632064342&site=1

    Expensive at 75 English pounds ($150 US) and $268 Aus. I don't recall
    spending 75 pounds for it in London. But I may have lost the
    importance of the exchange rate at the time or they have gone
    up on the price in the last few years.

    Paul Lamar ...No rotor no motor.
    ---------------------------------------------------------------

    Here's a search web site for books. If you buy it outside of the
    US, postage will be a bite more.

    http://www.usedbooksearch.co.uk/cgi/search.cgi

    Joel



    Paul,

    Here's an introductory book on turbines recommended by author and
    aircraft designer Dan Raymer. It's only $95, and just $69 for
    members of AIAA. Comes with software too.

    I haven't read it yet, but it's on my list.

    http://www.aiaa.org/content.cfm?pageid=362&id=975
    <http://www.aiaa.org/content.cfm?pageid=362&id=975>


    Regards,

    Gordon.

There is a lot of info around on axial flow gas turbines.
What is hard to find is radial inflow gas turbine design info.

I was thinking of the specific speed concept and how to illustrate
it for our purposes. One idea is a 3D table with typical
rotary engine gas flow numbers. Do you have any ideas on this?

Here are some charts from a NASA paper done by a guy by the name of
H.E. Rohlik that did a lot of design  research on radial inflow and
other turbines.

If you put the key word "Rohlik" in:
http://ntrs.nasa.gov/search.jsp?N=17&Ne=2
the search engine you can get this paper in pdf form.
If you can't get it let me know. Doug had some problems.
I have it.

The concept of specific speeds is central to understanding
turbines.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.