Subject: tig welding to chrome
From: Rotary Engine
Date: 3/25/2007, 5:16 PM
To: AARotary Engine


Has anybody tried, or can you try, tig welding SS to a chrome bumper?
--  Paul Lamar ...No rotor no motor.

How about brazing the tube in? The brazing does not require very high
temps?  After all it is the cool side of the housing.
Bulent

That might work very well. Good idea Bulent.
Does braze stick to SS? If not the tubes could be 4130
or other seamless steel tubing.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.