Has anybody tried, or can you try, tig welding SS to a chrome
bumper?
-- Paul Lamar ...No rotor no motor.
How about brazing the tube in? The brazing does not require very high
temps? After all it is the cool side of the housing.
Bulent
That might work very well. Good idea Bulent.
Does braze stick to SS? If not the tubes could be 4130
or other seamless steel tubing.
--
Paul Lamar ...No rotor no motor.
I'll ask the welder in the morning.
Bulent
Paul,
Melting point of Al about 660 deg. C
silver solder about 593 deg C
brazing alloy about 645 deg C
Would appear to be tricky to braze, silver solder or weld.
Colin Smith
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.