Subject: not the cheapest way to go
From: Rotary Engine
Date: 3/27/2007, 8:42 PM
To: AARotary Engine


How to make a two pass rad out of a one pass rad.

Cut a notch in one header tank and insert and tig
weld in a baffle. Then close up the hole and tig weld
in the neck. The other end is just all capped off.
-- 
Paul Lamar ...No rotor no motor.

-------------------------------------------

Dear Paul
       The way you have it in pic is not the cheapest. You do not have to
cut the rad tank that way to make a 2 pass rad out of a single pass. I
didn't do yours that way.

               Regards

              Ed Klepeis
-----------------------------------------------------------

Don't keep us in suspense Ed. How did you do it?
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.