Subject: belt drive for single rotor
From: Rotary Engine
Date: 3/29/2007, 10:19 PM
To: AARotary Engine



Paul,  is a belt drive for the single rotor a good idea?  Are  you
interested in designing it?  If it was rated at 125 hp, it would be
more than adequate. I anticipate between 100 and 110 hp.
Jerry

Sure.
Who is going to build it. Ken Welter has belt drive
tested and proven.
--  Paul Lamar ...No rotor no motor.

If I can't do it myself, I will hire a real machinist.   Scale down
Ken's if he doesn't mind...      Jerry

You don't want to scale it down much as the peak torque pulses
are the same. Check with Ken on the price. He owns a machine
shop. It will cost you way more to re-invent the wheel
not to mention the years of rotary experience Ken has.
Ken builds his own large drive sprockets as they are not available
in aluminum according to Ken.

 Ken Welter <rotary.coot@verizon.net>

Paul Lamar ...No rotor no motor.

 I am no longer building and selling the cog belt units but I would
make the pulleys and you are right. I would stick to the 85 mm belt as
the power pulse is the same as a two rotor if not worst.
Ken


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.