Subject: Cutting P ports
From: Rotary Engine
Date: 3/31/2007, 2:01 PM
To: AARotary Engine



Here are the housings so far.

Joe Berki

Those look like pretty good P-port holes Joe.
Are these junk rotor housings or are you going to
use them?
If you are not going to use them it would help if
you
did the SS tube tig welding experiment on them.
-- 
Paul Lamar ...No rotor no motor.


Paul
What is the function of the inserts in the exhaust
ports [in first pic]? I have heard they help reduce
high frequency exhaust noise. Is this correct?
regards, Robert


Those are Inconel inserts and they keep the exhaust from melting
the rotor housings.

If you are talking about the little sheet metal right angles
you are correct. They reduce the noise. The turbo engines
don't have them. I would grind them out for aircraft service.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.