Dear Paul
On your RV10 motor mount how do you plan on putting in the landing
gear socket could you draw that up.
Regards
Ed Klepeis
Here is the new style rear beam motor mount for the
RV10 and a three rotor engine.
You can cut away a lot of the stock Vans RV10 motor mount.
BTW Mark S. I found your cover plate for your P-port engine.
Will ship Fed Ex on Monday.
Paul Lamar ...No rotor no motor.
Dear Paul
On your RV10 motor mount how do you plan on putting in the landing
gear socket could you draw that up.
Regards
Ed Klepeis
I could guess at it but I don't have a good enough picture
to design it. Do you have a picture with out all the towels
covering things up? Also what is the distance from the firewall
to the prop flange? I need a picture (like these) from the side as
well as the front looking back un obstructed. Stock cowl or
custom cowl? If stock cowl I need some pictures of the cowl.
Side view, front view, top view and bottom view. Preferably
done with a long (telephoto) lens out doors.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.