Subject: New style rear beam motor mount for RV10
From: Rotary Engine
Date: 4/1/2007, 12:07 PM
To: AARotary Engine


Here is the new style rear beam motor mount for the
RV10 and a three rotor engine.
You can cut away a lot of the stock Vans RV10 motor mount.


BTW Mark S. I found your cover plate for your P-port engine.
Will ship Fed Ex on Monday.

Paul Lamar ...No rotor no motor.


Interesting. The prop flange to firewall distance  is  about 5 inches
longer than I would have anticipated.   You are right,  this is
doable if I am permitted to cut down the Lycoming engine mount.    I
assume the stock engine would be an IO 540?  Jerry

p.s.    l'd like to make that 3 rotor oil pan.  Probably hold 12
quarts or more.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.