Subject: Radial inflow turbine HP & turbo compound
From: Rotary Engine
Date: 4/1/2007, 7:24 AM
To: AARotary Engine

Our focus here is how much HP can we get out of
a radial inflow turbine as found in a turbo charger.
It is not likely we will ever use a jet engine style
axial flow turbine for a turbo compound rotary engine.
Here is a simple turbine HP formula I found in Aircraft
Gas Turbine Engine Technology by I.E.Treager
The radial inflow turbine can be about the same efficiency
as a axial flow turbine in a narrower range of flows.
Fortunately in the range we  are interested. Particularly
with the new variable vane versions.

The red line on the air flow chart is for a 2 rotor and
the blue line is for a 3 rotor.

Running the numbers.
At 100% VE the 2 rotor uses 35 pounds of air per minute at 15 psi boost
or .58 pounds per second. Therefore using this formula a typical
turbo charger turbine would be .58/5 X 679 HP or 79 HP.
Coincidently about what NASA calculated for a rotary based turbo
compound engine.

In the case of the three rotor the number is 108 HP.

P-ports typically have VE of 120% so these numbers become
96 HP and 130 HP.

If you are not as excited by this result as I am you don't
understand the implications of extracting 80 more HP from a
2 rotor rotary engine with NO increase in fuel burn :)

The question is what is the automotive world waiting for?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.