Anybody know the torque spec for the 2 larger diameter tension
   bolts (21mm head) that go in from the front on a 20B?

   Al

   That is a tough one Al. I have never seen a shop manual
   on the 20B in English.

   I will forward this question to Jim Mederer.

   --
   Paul Lamar ...No rotor no motor.


Hi Paul,

   As far as I can tell from the 20B/Cosmo book I have, Mazda never
authorized dealership repair of the 20B, so they never published repair
specs.  I have always used the same torque on large and small (24 ft-#)
with no bad results.

Jim Mederer


Thanks Jim.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.