Paul,
When building a cog-belt redrive for the 13b turbo, how many teeth
should the driver sprocket have? (8mm pitch)
--
Erik Snyman
Messina
South Africa.
For a 3:1 gear reduction.
44 tooth drive socket will be 112 mm in pitch diameter
or about 4.4 inches in diameter. The driven socket should
be about 132 teeth or 1056 mm circumference or about 336
mm diameter or about 13.23 inches in diameter.
The next size down is 40 teeth on the driver with 102 mm pitch
diameter or 4.01 inches and 120 teeth on the driven 305.6
mm pitch diameter or about 12 inches in diameter.
I would go with the 44 tooth version.
I don't see anything in McMaster Carr with that large of
a pulley. I think Ken Welter was making his own large pulley.
Also Ken recommends an 85 mm wide belt and I don't
see that either.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.