Experimental air craft and rotary engines.
I kind of think there needs to be two sets of discussions going on about
rotary aircraft engines. One should be about the "bolt-on and go fly it"
parts and pieces, and the other one should be for people that don't mind
dead-sticking it occasionally (hah!).. And there should be some fairly
clear distinctions between "experimental" and "standard". Just thinking
out loud, mind you.
And, what Paul said about certified engines is very true. And to answer
a question Paul asked me a while back, but which I never answered. Probably
about $2000/year for maintenance on my Cessna 182. Maybe more. And that's
with me turning the wrenches mostly.
Matt Prather
---------------------------------------------------------
Yep, Matt is right. There is a spectrum of individuals involved in the
homebuilt aviation community. That spectrum goes all the way from people who
only are interested flying and pay someone else to build their airplanes to
guys who create, build, and fly their own designs. The same is true when it
comes to engines that power those homebuilt s. There are those who have the
cash and no interest in tinkering; who just buy the firewall forward package
and call it good. There are also those for whom the engine is soul of their
airplane and devote their lives to its birth, care, and feeding.
And, between both these extremes you've got you and me. We want to fly, but
the technology and revolutionary concept behind the rotary sings its Siren's
song and draws us in. It has all the attributes of a perfect aircraft power
plant - and at an affordable price. What could be more alluring. There are
so many advantages that we can't resist giving it a go.
However, the state of aviation implementations for rotaries, especially the
supporting systems, is not quite far enough along so that the average "Joe"
can just plug and play. If you and I are in the middle of the spectrum and
want the advantages of the rotary, but don't have the time, skills, or
interest to devote to that experimentation then we're doomed to be unhappy
either way we go. If we go with the rotary we're wedded to someone who
constantly nags us and takes a lot of attention. If we go with Lycoming
we're wedded to someone who isn't quite as needy but spends all our money.
Pick your partner; that is unless you're into glider's.
The progress of rotaries for aviation has come a long way in the last 15
years. It's getting closer to plug and play at an affordable price -
especially because of those pioneers on the far end of the spectrum like
Paul Lamar, Tracy Crook, David Atkins, Ken Welter, Perry Mick, George
Graham, Ed Anderson, and many, many, many more that have dedicated
themselves to the soul of their aircraft. But we're not there yet and maybe
we'll never really get there because it's a grass-roots effort without
enough infrastructure to maintain momentum. Only time will tell.
Thanx,
Joe Hull
----------------------------------------------------------
Unfortunately experimental aviation is evolving towards exploiting a loop hole
in the FAA regulations bypassing the certified aircraft maintenance rules.
It also lowers the cost of buying and owning an aircraft. This raises the
expectations of the kit plane builder. That is why the EAA never mentions
the word experimental. The question is how far is this going to go before
the bureaucrats put a stop to it?
I started this newsletter almost ten years ago to make it as easy as possible
to adopt a rotary engine. It has not always worked. Some builders are not
computer literate enough to use the Internet and many others don't avail
themselves of the information that is on the Internet about the subject.
Another group disbelieve what they read.
I take some things for granted too many times as far as peoples knowledge of
engines are concerned and I have failed to go over the fundamentals. I also
have not added all things to the web site below. However some critical issues
are on
http://www.wankel.org/ Maintained by Mark Wrathal in Europe. This web
site link and purpose is mentioned on the web site below. Please read it.
The significance of the heat range of spark plugs is one of them. It was not
until Joe broke an apex seal because of a overheated spark plug used too
long did this subject come up. This is an extremely rare occurrence. People
buy rotary engines from a builder and the builder does not take the time
to educate the user on the correct spark plugs to use and why they should
be used. With a certified engine you have no choice in the matter.
There is one heat range plug and that is it. There may be several brands
but they all have the same heat range. The rotary on the other hand has
a wide range of plugs available depending on what use the rotary is put to.
Hopefully this problem is now fixed. I recently uploaded a section to the
website discussing this issue.
http://www.rotaryeng.net/Spark-plugs/Spark-plugs.html
Please read it.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.