Subject: 2nd gen sensors
From: Rotary Engine
Date: 4/7/2007, 9:59 PM
To: AARotary Engine



    > > If the oil temp sensor is in the pan I cannot get a reading on
   it with
    > > an ohm meter has anyone got the impedance for it? Same goes for
   the oil
    > > pressure sending unit. Is it a different type of system that
   does not
    > > use changing electrical resistance with pressure? I also found
   another
    > > sensor in the water pump is this temp also? Thanks for any help
    > >
    > > Joe Berki
    > > Limo EZ

   Joe, you should use the sensors recommended by Tracy. I have oil temp
   sensor on the oil filter mount block and water temp on the pump
   discharge
   side. I don't think the Mazda sensors will work with Tracy's EC2/EM2 ?
   Buly
   Waiting for replacement OP sensor from egauge.com
   Buly



Buly,

Still lurking and reading.  That link egauge.com sent me to an software
application generator company.  That's not where you bought temp sensors
is it?

Allen
Houston



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.