Subject: Experimental air craft and rotary engines.
From: Rotary Engine
Date: 4/7/2007, 10:10 PM
To: AARotary Engine



   Experimental air craft and rotary engines.

   I kind of think there needs to be two sets of discussions going on about
   rotary aircraft engines. One should be about the "bolt-on and go
   fly it"
   parts and pieces, and the other one should be for people that don't
   mind
   dead-sticking it occasionally (hah!).. And there should be some fairly
   clear distinctions between "experimental" and "standard". Just thinking
   out loud, mind you.

   And, what Paul said about certified engines is very true. And to
   answer
   a question Paul asked me a while back, but which I never
   answered. Probably
   about $2000/year for maintenance on my Cessna 182. Maybe more. And
   that's
   with me turning the wrenches mostly.

   Matt Prather
   ---------------------------------------------------------

   Yep, Matt is right. There is a spectrum of individuals involved in the
   homebuilt aviation community. That spectrum goes all the way from
   people who
   only are interested flying and pay someone else to build their
   airplanes to
   guys who create, build, and fly their own designs. The same is true
   when it
   comes to engines that power those homebuilt s. There are those who
   have the
   cash and no interest in tinkering; who just buy the firewall forward
   package
   and call it good. There are also those for whom the engine is soul
   of their
   airplane and devote their lives to its birth, care, and feeding.

   And, between both these extremes you've got you and me. We want to
   fly, but
   the technology and revolutionary concept behind the rotary sings its
   Siren's
   song and draws us in. It has all the attributes of a perfect
   aircraft power
   plant - and at an affordable price. What could be more alluring.
   There are
   so many advantages that we can't resist giving it a go.

   However, the state of aviation implementations for rotaries,
   especially the
   supporting systems, is not quite far enough along so that the
   average "Joe"
   can just plug and play. If you and I are in the middle of the
   spectrum and
   want the advantages of the rotary, but don't have the time, skills, or
   interest to devote to that experimentation then we're doomed to be
   unhappy
   either way we go. If we go with the rotary we're wedded to someone who
   constantly nags us and takes a lot of attention. If we go with Lycoming
   we're wedded to someone who isn't quite as needy but spends all our
   money.
   Pick your partner; that is unless you're into glider's.

   The progress of rotaries for aviation has come a long way in the
   last 15
   years. It's getting closer to plug and play at an affordable price -
   especially because of those pioneers on the far end of the spectrum like
   Paul Lamar, Tracy Crook, David Atkins, Ken Welter, Perry Mick, George
   Graham, Ed Anderson, and many, many, many more that have dedicated
   themselves to the soul of their aircraft. But we're not there yet
   and maybe
   we'll never really get there because it's a grass-roots effort without
   enough infrastructure to maintain momentum. Only time will tell.

   Thanx,
   Joe Hull

   ----------------------------------------------------------
   Unfortunately experimental aviation is evolving towards exploiting a
   loop hole
   in the FAA regulations bypassing the certified aircraft maintenance
   rules.
   It also lowers the cost of buying and owning an aircraft. This
   raises the
   expectations of the kit plane builder. That is why the EAA never
   mentions
   the word experimental. The question is how far is this going to go
   before
   the bureaucrats put a stop to it?

   I started this newsletter almost ten years ago to make it as easy as
   possible
   to adopt a rotary engine. It has not always worked. Some builders
   are not
   computer literate enough to use the Internet and many others don't avail
   themselves of the information that is on the Internet about the subject.
   Another group disbelieve what they read.

   I take some things for granted too many times as far as peoples
   knowledge of
   engines are concerned and I have failed to go over the fundamentals.
   I also
   have not added all things to the web site below. However some
   critical issues
   are on http://www.wankel.org/ Maintained by
   Mark Wrathal in Europe. This web
   site link and purpose is mentioned on the web site below. Please
   read it.

   The significance of the heat range of spark plugs is one of them. It
   was not
   until Joe broke an apex seal because of a overheated spark plug used
   too
   long did this subject come up. This is an extremely rare occurrence.
   People
   buy rotary engines from a builder and the builder does not take the
   time
   to educate the user on the correct spark plugs to use and why they
   should
   be used. With a certified engine you have no choice in the matter.
   There is one heat range plug and that is it. There may be several brands
   but they all have the same heat range. The rotary on the other hand has
   a wide range of plugs available depending on what use the rotary is
   put to.

   Hopefully this problem is now fixed. I recently uploaded a section
   to the
   website discussing this issue.

   http://www.rotaryeng.net/Spark-plugs/Spark-plugs.html

   Please read it.

   Paul Lamar ...No rotor no motor.

   ------------------------------------------------------
   This looks good Paul..

   More questions.. For Joe: Prior to the insulator failure, how recently
   had the plugs been out and inspected? From the dark color in the pic
   posted, it doesn't appear that plug was running excessively hot. Hmm..

   I think it was discussed before, but I can't remember the answer. Was
   it predictable that the plug being used might be susceptible to
   overheating and failure (based on published heat range)?

   Maybe it should be standard practice to remove and inspect the plugs
   after each flight for the first 10 hours?

   I can see that picking a heat range for the plugs can be a challenge -
   especially given the number of variables involved. For instance, if the
   mixture is overly rich during ground running, it might be interpreted
   that the heat range is acceptably cool, when in fact at high power the
   plug may be running too hot.

   When there is some standardization in ignition, fuel delivery, and
   exhaust components, things are going to get easier... I wonder what
   Powersport uses in their engines..

   Another topic - Jim Mederer said that "only power matters" when tuning
   the engine. That says that the load meter built into the planetary
   reduction might really be a key component. Very cool. If you have a CS
   prop, you just lean the mixture until the torque peaks - assuming you
   have adequate cooling.

   Matt-


   I think the cylinder heat temperature thermal couple will also
   be a key component. I am very excited about Mark S's installation
   of CHT probes in his 3 rotor. This area is immediately adjacent
   to the spark plug.

   BTW Mark, I will drop off the 2, four channel data acq modules when
   I see you a week from this coming Sunday.

   IMHO Jim's suggestion of running plugs two steps cooler than normal
   is an excellent idea. If the engine will make it to the run up
   area with out fowling you have it made. It makes no sense at all to
   run street car heat range spark plug in an aircraft engine. Aircraft
   use is nothing like street car use.

   Paul Lamar


Paul, Mark

I'm curious about Mark's installation of thermocouples as shown in the
photos.  Will there be trouble with electromagnetic interference from
the the plug/plug wires?  I know the wiring will be shielded, but am
curious as to what type/class of shielding will he use?  Also what type
of T/C and range and or part number.  Thanks.

Allen
Houston

That is something I hadn't heard of. The CHT probes are real close
to the plug wires in my O-470 and that does not appear to be
a problem. On the other hand they and the spark plug wires are
shielded. I guess it is possible. If we sample the data often
enough the spark will appear in the data at idle.

Have you experienced RF interference with thermocouples?

I'll let Mark answer the last questions as I don't know
what he used.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.