Subject: cog-belt redrive for the 13b turbo
From: Rotary Engine
Date: 4/7/2007, 2:29 AM
To: AARotary Engine



I'd like to know more about the redrive pictured in the previous
message.  Anyone know where I can contact the builder of that
drive?

Thanks,
Bob V

Yes it was Ken Welter but he just told us he is not making
them anymore. Last I heard he was working on a Ford planetary based
3.17:1 PSRU.

Ken, what happened to your web site? I just tried to long on.

Paul Lamar

Paul,

At a Easter flyin in Australia a maintenance guru mentioned that Rotax 900
engines lubricate the gearbox with engine oil, and that if 100LL fuel is
used the lead buildup in the oil causes gear teeth failure. It is
recommended to change oil every 25 hours max. Maybe a belt drive is a good
way to go.

Colin Smith

We are not seeing that.  In fact other than one or two
boxes that have been improperly machined by Ross we are seeing no
trouble of any kind from anybody with the Ford gears. I thought lead
was a secondary lubrication anyway. At least when it comes to exhaust
valves. I could be way wrong as I don't know anything about it at all :)

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.