> > If the oil temp sensor is in the pan I cannot get a reading on
       it with
        > > an ohm meter has anyone got the impedance for it? Same goes
   for
       the oil
        > > pressure sending unit. Is it a different type of system that
       does not
        > > use changing electrical resistance with pressure? I also found
       another
        > > sensor in the water pump is this temp also? Thanks for any
   help
        > >
        > > Joe Berki
        > > Limo EZ

       Joe, you should use the sensors recommended by Tracy. I have oil
   temp
       sensor on the oil filter mount block and water temp on the pump
       discharge
       side. I don't think the Mazda sensors will work with Tracy's
   EC2/EM2 ?
       Buly
       Waiting for replacement OP sensor from egauge.com
   <http://egauge.com>
       Buly



   Buly,

   Still lurking and reading.  That link egauge.com <http://egauge.com>
   sent me to an software
   application generator company.  That's not where you bought temp sensors
   is it?

   Allen
   Houston

Allen,

The correct link for the sensor source is www.egauges.com
<http://www.egauges.com>.

Mark S.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.