> > If the oil temp sensor is in the pan I cannot get a
reading on
it with
> > an ohm meter has anyone got the impedance for it? Same
goes for
the oil
> > pressure sending unit. Is it a different type of system that
does not
> > use changing electrical resistance with pressure? I also
found
another
> > sensor in the water pump is this temp also? Thanks for any
help
> >
> > Joe Berki
> > Limo EZ
Joe, you should use the sensors recommended by Tracy. I have
oil temp
sensor on the oil filter mount block and water temp on the pump
discharge
side. I don't think the Mazda sensors will work with Tracy's
EC2/EM2 ?
Buly
Waiting for replacement OP sensor from egauge.com
Buly
Buly,
Still lurking and reading. That link egauge.com sent me to an
software
application generator company. That's not where you bought temp
sensors
is it?
Allen
Houston
I.m sorry Allen, it should have been
www.egauges.com.
Buly
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.