Subject: 200 lb. rotary option
From: Rotary Engine
Date: 4/9/2007, 10:29 PM
To: AARotary Engine


>>I can second that desire for a 200 lb rotary.   I
have just decided
>>to scratch build the Zenith 701. I need the
extreme STOL capability
>>to get in and out of a 800 ft runway in my
pasture.   I am going to
>>Sun N Fun primarily  to talk to them and buy the
plans.   Too bad for
>>me that there is no rotary option for this
airplane.

Would I pre-mature here by saying that when I get
through testing my OMC engines, that we'll have a two
rotor air-cooled engine would put out around 100
horses at around 120 lbs. N/A?

I've never been a Rotax fan due to their high prices
and two stroke vibrations.  Am wanting to offer a
rotary alternate to the 503, 582, and 900 series
Rotaxes with ceramic apex seals that will probably
never need replacing.  And, at a cost probably less
than the 582.

Kevin Richey



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.