Hi Don;
       Also meant to ask if you have removed and replaced the stock 20B
   exhaust
       sleeve inserts.
       I have heard they are quite restrictive and many people replace
   them
       with 13b turbo inserts.
       Although removing them is a good way to break taps...
       Cheers
       Cary

   Don,
   I removed the stock 20B exhaust inserts from my engine.  Not a job for
   the faint of heart!  The best way I found was to grind away the
   material
   from inside the port until you can see the roll pin, then drive them
   through with a punch.  It ruins the inserts, but I didn't have any
   future use for them anyway.

   Mark S.

   If your off next Sunday Don, Allen and anybody else in the
   neighborhood and you don't mind driving to Lockhart I will be there
   10:00 or 11:00 AM visiting Mark. We can have a mini Rotary Engine in
   Aircraft Meeting and How to cool Your Wankel book signing at Mark's
   hangar.

   Paul Lamar

Paul,
Sounds like fun.  In case you have trouble finding the airport on Paul's
map, it is on Hwy 183, 1/2 mile past Wally-World, just south of town.

Mark S.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.