Subject: 200 lb. rotary option
From: Rotary Engine
Date: 4/10/2007, 7:03 AM
To: AARotary Engine

    > >>I can second that desire for a 200 lb rotary. I
    > have just decided
    > >>to scratch build the Zenith 701. I need the
    > extreme STOL capability
    > >>to get in and out of a 800 ft runway in my
    > pasture. I am going to
    > >>Sun N Fun primarily to talk to them and buy the
    > plans. Too bad for
    > >>me that there is no rotary option for this
    > airplane.

   Would I pre-mature here by saying that when I get
   through testing my OMC engines, that we'll have a two
   rotor air-cooled engine would put out around 100
   horses at around 120 lbs. N/A?

   I've never been a Rotax fan due to their high prices
   and two stroke vibrations. Am wanting to offer a
   rotary alternate to the 503, 582, and 900 series
   Rotaxes with ceramic apex seals that will probably
   never need replacing. And, at a cost probably less
   than the 582.

   Kevin Richey


   Kevin,

   What engine are you talking about? Where can you get these?

   Regards,

   Gordon.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.