Subject: 200 lb. rotary option
From: Rotary Engine
Date: 4/10/2007, 7:28 PM
To: AARotary Engine


      > >>I can second that desire for a 200 lb rotary. I
      > have just decided
      > >>to scratch build the Zenith 701. I need the
      > extreme STOL capability
      > >>to get in and out of a 800 ft runway in my
      > pasture. I am going to
      > >>Sun N Fun primarily to talk to them and buy the
      > plans. Too bad for
      > >>me that there is no rotary option for this
      > airplane.

     Would I pre-mature here by saying that when I get
     through testing my OMC engines, that we'll have a two
     rotor air-cooled engine would put out around 100
     horses at around 120 lbs. N/A?

     I've never been a Rotax fan due to their high prices
     and two stroke vibrations. Am wanting to offer a
     rotary alternate to the 503, 582, and 900 series
     Rotaxes with ceramic apex seals that will probably
     never need replacing. And, at a cost probably less
     than the 582.

     Kevin Richey


     Kevin,

     What engine are you talking about? Where can you get these?

     Regards,

     Gordon.

hi  Gordon, these are O.M.C. snowmobile engines built over 30 Yrs
ago.  Paul Moller bought the rights to them a long time ago and modified
them for his skycar. the problem is there are very few of them left, some
new parts are no longer available. an engine is offered now and then for
sale. i have two of them , one is modified with an aftercooler and aux
cooling device. i just have not aquired an airframe to put them in and am
too busy trying to develop a single rotor mazda engine to fool with them so
have them for sale on barnstormers and the bd5 newsletter. would like to
talk to you Kevin.    wyo. walt


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.