Subject: Mazda powered zodiac 601xl
From: Rotary Engine
Date: 4/11/2007, 3:32 PM
To: AARotary Engine


 I am going to start building my aircraft sometime
this year and am currently leaning towards a zodiac 601xl with a rotary
(Wankel) engine. I plan to do all the plane and engine building myself.
Seems that a Mazda 12a or lower powered 13b would fit the bill. Have
been reading the large volume of email generated. It seems most builders
are building more powerful engines than I will need. Am considering
trying for a SLA cert. Any suggestions? ... Barry

----------------------------------------------------

As I understand it, from others on here, the Wankel is too heavy
for the 601. As I recall the engine weight limit is about 200 pounds.
Even a Mazda one rotor with PSRU would have trouble with that
specification. One person is using an O-200 which weighs
about 190 pounds.

Also SLA certified specifically states no rotary engines allowed.
Only in the SLA experimental category are rotary engines allowed.

Paul Lamar ...No rotor no motor.

 Yes I second that. The Mazda is way to heavy and really it would be
hard to beat the price of an 0-200.
I never heard of the rotary being baned from the LSA planes, sounds
like someone in the FAA had a grudge against them.
Hey Barry if your scratch building a 601 I could get you a PDX file
for the laser cutting.
 Ken


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.