Subject: Still a few unkown openings Continued]
From: Rotary Engine
Date: 4/11/2007, 5:17 PM
To: AARotary Engine



 Engine Pictures 4: I am planing to use a remote water pump, does it matter
on which side to feed the engine?

-------------------------------------------------
The right side is the feed the left side is the return from the block.
I hope it is not an electric water pump. PL
---------------------------------------------------------

Engine Pictures 5: What should be the torque value for the drainage plug at
the bottom there?
-----------------------------------------------------------
You got me there. Not much. I just has to seal. PL
----------------------------------------------

Engine Pictures 6:  I am planning to reduce the height of the oil feed,
can  I eliminate the overflow little tube?
-------------------------------------------------
You need some sort of vent in the oil pan. I would run the
tube to a catch can and see what comes out. PL
--------------------------------------------------

Last two in the next email

JP

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.