Subject: Still a few unkown openings Continued
From: Rotary Engine
Date: 4/11/2007, 8:16 PM
To: AARotary Engine


 Engine Pictures 4: I am planing to use a remote water pump, does  it matter
on which side to feed the engine?

-------------------------------------------------
The right side is the feed the left side is the return from the block.
I hope it is not an electric water pump. PL
 What Paul said :)
---------------------------------------------------------

Engine Pictures 5: What should be the torque value for the drainage  plug at
the bottom there?

In German, the torque value is called "gut'ntight", or common sence.


Engine Pictures 6:  I am planning to reduce the height of the oil  feed,
can  I eliminate the overflow little tube

I cut down the tube and eliminated the little tube. A 3/16" hole on
the top of the filler cap is doing a great job venting the crank case.
The inside of my cowling is white and there is no any sign of oil
anywhere.
Buly
CZ MK-IV Cosmo 13B
23.5 hrs



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.