> I bought 3 13B engines sight unseen. They were
> described as rebuildable,
> two 91s and a 86. It turns out they were a box full
> of parts. I thought
> they were assembled engines, but then I didn't ask.
> Dumb me.
>
> Some of the parts are marked as #1, #2 and #3, all 3
> e-shafts and some
> of the rotors and some of the other parts. None of
> the counter weights
> are marked. I can't see any complete set of parts
> that are marked the
> same to assemble a complete engine.
>
> In general the parts do indeed look re-usable. The
> ones that we have
> measured pass Mazda's tests.
>
> The problem is that I don't know which goes with
> which. I am especially
> concerned about the counter weights. None of the
> counter weights are marked.
>
> Is it permissible to just assemble an engine with
> whatever parts seem to
> belong to each other?
>
> What to do?
>
> Doc Custer
> Retired Software Engineer and sometime Audiologist
>
> As well you should be Doc :)
> I don't know how to identify counter weights and I
> doubt any
> of the shop manuals tell you how either. I could be
> wrong
> but your best bet is call Mazdatrix and ask for
> John.
> Other than that people mix and match all the time as
> long
> as the rotors are the same. I would for sure have it
> professionally
> dynamically balanced.
>
> Take some detailed pictures of the counter weights
> and
> upload them. Some one on here might recognize them.
>
>
> Paul Lamar ...No rotor no motor.
Paul
I think it was in this thread that a comment was
posted indicating a couple of measurements for rotor
combustion depression depth. I meant to save it, but
managed to lose it. Seems like useful info for a parts
scavenger like me. Can you please repost it?
regards, Robert
Give me some key words to search for. A lot of water over
the dam since then. I'll try rotor depression.
Nope that did not work. Are you sure it was not on the Mazdatrix
web site.
--
Paul Lamar ...No rotor no motor.
Paul,
Its the Rotor "Weight Code" Stamp thread from a week or two ago.
I'll forward the relevant e-mail to you.
See my next e-mail
Don
I think this is what Robert is looking for:
Subject: Rotor "Weight Code" Stamp
Date: 4/4/2007 5:11:34 P.M. Central Daylight Time
Don
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.